banner



Home  ›  How To Unlock A Smok Vape

How To Unlock A Smok Vape

Written By Friday, January 6, 2023 Add Comment Edit

Download Commodity

Download Commodity

Is your SMOK vape interim up? Whether you want to reset the puff counter, fix errors nigh ohms existence also high or low, or endeavour to restore your SMOK box modernistic back to its original factory settings, we can help! This wikiHow tutorial will teach yous 4 like shooting fish in a barrel ways to reset the most popular SMOK advanced mods and pod mods, and show you how to perform a mill reset and firmware update on mods like the Magazine, G-Priv and Morph.

Things Y'all Should Know

  • If you lot're getting "ohms too loftier" or "ohms also low" errors, remove the tank, clean the 510 connectors, and press the burn down button to reset the resistance.
  • To reset the puff count, select Puff Articulate or Puff Reset from the bill of fare, or press the Fire and Downward buttons, depending on your model.
  • Most mods tin be reset to factory defaults by removing the bombardment and pressing the Upwardly and Down buttons together.

  1. 1

    Remove the tank from your mod. If you're getting the "ohms too depression" or "ohms likewise loftier" error even when using the recommended wattage for your curl, y'all can normally prepare the error by removing the tank to reset resistance detection.

  2. 2

    Make clean the connectors. If you haven't already done and then, make sure the 510 connectors are clean and dry, and that no e-juice is on the outside of the tank.[1]

    • To make clean your 510 connectors, dip a cotton fiber swab into isopropyl alcohol, and gently swab away whatsoever due east-liquid buildup and condensation gunk from the pins and connection points.[2]

    Advertisement

  3. iii

    Press the Fire button with the tank removed. Just press the button a single time—don't press and agree.

  4. 4

    Place the tank bank in the mod. Once detected, you'll exist asked if you lot've inserted a new scroll.

  5. 5

    Select N . This final step erases the resistance retentiveness recorded from the previous tank.

    • If y'all're all the same getting resistance/ohm errors, make sure the screws are tight if yous're using the RBA roll.
    • If possible, try inserting the tank into another mod to see if the same problem occurs. If the tank works in some other device, the problem is non the tank. Similarly, effort inserting a different tank into your main modernistic.

    6. Advert

  1. 1

    Open your mod's Settings menu. If yous want to reset your puff count to 0, you can practise so in your settings.

    • If your SMOK modern has a bear on screen (like the SMOK G-Priv ii), you lot tin can tap the settings icon or Menu on the home screen.[3]
    • For other mods, including the SMOK Conflicting, Mag, X-Priv, and Procolor, press the Burn down push button 3 times to open up the menu.[4]
    • For mods without elaborate full-screen menus, including the SMOK Nord, Morph two, Scar, RPM, & Rigel, you can reset the puff counter by pressing the Fire and Downwards (left) buttons at the aforementioned time.

  2. 2

    Navigate to the Puff Settings or Puff menu. Depending on your mod, you lot can get in that location by pressing the navigational buttons or by pressing the Fire push button to click through each menus.

    Advertisement

  3. three

    Select Puff Articulate or Puff Reset . The process might be a little different depending on your mod, only on the SMOK Alien, Mag, and Procolor, you can printing and hold the Fire button until "Puff Clear" or "Puff Reset" is agile.[v]

  4. 4

    Select Yes . You tin exercise this by pressing or borer the Up push button to alter the value of the menu and and so pressing the Fire button again to select. This resets your puff count to 0.

    • If your modern displays "max puff" or "puff over" errors once you achieve a certain puff count, yous'll too accept the choice of increasing the puff setting or placing your vaping plan into Never mode.[6]

    5. Advertisement

  1. one

    Remove the batteries from your modern. If y'all demand to reset your SMOK mod, yous tin usually exercise then by removing the battery and pressing a combination of keys while the battery door is open up.

    • The steps may vary slightly past model, but should work on some of the more pop models including Alien, Procolor, Magazine, Veneno, E-Priv, and X-Priv.

  2. 2

    Printing and hold all physical buttons on the mod. Keep the bombardment compartment door open while you do this.

    • For some models, including Veneno and Alien, y'all should only have to hold down the Up and Downward buttons. Other models may also crave yous to press the Fire button at the same time.

  3. iii

    Reinsert the batteries. If this does non factory reset your modernistic, repeat the process while your modernistic is connected to your reckoner with a USB data transfer cable.

    • Some mods may automatically reset if you get out the batteries out for an extended period of time.

    4. Advertisement

  1. 1

    Download the firmware update for your mod. If you lot demand to install new firmware on your mod, you'll have to become the firmware update from SMOK. Most firmware download links are no longer available on SMOK'south website, so you lot'll need to send an email to support@smoktech.com to request a firmware download link.[7]

    • Almost people will not need to update the firmware unless SMOK notifies yous that an update is bachelor.[8]
    • If your device has firmware that can be updated, you'll typically run into the firmware version on the screen right when you power up the mod. Make sure you're downloading a later version of the firmware than what y'all have now.
    • There are even so two firmware download links bachelor on SMOK's website:
      • Alien: https://www.smoktech.com/faq/270
      • G-Priv2: Visit https://www.smoktech.com/faq/365
    • The package you download contains NuMicro ISP Programming Tool, the firmware updating tool, and the actual firmware for your model. Don't endeavor to install another modernistic's firmware on your mod, equally you can permanently destroy it.

  2. 2

    Remove the bombardment from your mod. For the Alien and M-Priv2 updates, yous volition need to remove the battery. Other models might exist different—ask for specific instructions when y'all receive your update from SMOK customer support.

  3. 3

    Unzip the firmware files. You lot tin can easily unzip the package past correct-clicking the file, selecting Excerpt All, choosing a location, and and then clicking Extract.

  4. 4

    Connect your SMOK mod to a Windows PC with a USB cablevision. There's no firmware update software bachelor for macOS, then you'll demand access to a Windows PC to practice the update. To properly connect:

    • Connect ane end of the cable to the mod.
    • Press and concur the Fire button every bit you lot plug the other end of the cable into the reckoner. According to SMOK's instructions, you'll likewise need to go on holding the Burn down button while you perform the entire upgrade, though some Reddit users were able to update without property the button.[ix]
    • If you don't have the USB cable that came with your mod, you'll need to brand sure you're using a USB cablevision that has data transfer capabilities. If the cable can only charge your modernistic, it won't work.

  5. 5

    Open the extracted folder and double-click NuMicro ISP Programming Tool . This launches the tool you'll use to exercise the update.

  6. vi

    Click Connect . If this doesn't work, make sure you lot're holding downwardly the Burn button as you click Connect.

  7. 7

    Click APROM . You'll see this button on the left side.

  8. 8

    Select the file that ends with .bin. This is the actual firmware update file.

  9. 9

    Check the boxes side by side to "APROM" and "Config" at the lesser of the upgrade tool. These should be the only options selected at the lesser of the tool unless otherwise specified.[x]

  10. 10

    Click Start . Over again, try holding downwardly the Fire button as you lot exercise this and continuing to hold it throughout the update procedure.

    • One time the firmware is updated, you'll see "Laissez passer" at the bottom. At this point, you lot tin shut the tool and supersede the batteries in your mod.

    11. Advertizement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

About This Article

Thanks to all authors for creating a page that has been read xv,015 times.

Did this article help you?

Source: https://www.wikihow.com/Reset-Smok-Mod

0 Response to "How To Unlock A Smok Vape"

Post a Comment

Subscribe to: Post Comments (Atom)

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel